Gelson Dragon Protective Liner

2K PROTECTIVE LINER – TUNING FINISHING

Item: 2020 (Neutral), 20203 (Black), 20202 (Catalyst)

DESCRIPTION
Protection for car underbodies that can be used for textured finishing effect.

APPLICATION
You can use it for:
– Protection of car door sills, wheel housings, fenders and car chassis, trucks, pick- ups, industrial and commercial vehicles
– UV-resistance makes it very suitable as a bed liner on trucks, pick-ups, industrial and commercial vehicles.
– Exterior coating with coarse textured “tuning” effect.
The surface should be roughened and free from any dirt or dust residue. For better results, metal surfaces should be treated with an epoxy primer.
Do not use in extreme cold or hot temperature. Ideal application temperature is 20ºC with less than 60% humidity.
Spray gun cod. 85117 (pressure 2.5 atm) can be set up differently according to the desired use (textured “tuning” finishing coating or sealant/protective coating).

Indicative setting of the spray gun for protection of car door sills, wheel housings, pick-up beds etc.:
– Distance from the surface: about 20 cm.
– Jet adjusting handwheel: ½ turn
– Product adjusting handwheel: 2 ¼ turns
– 1 full coat
If used as a bed liner, wait for flash-off up to 50/60 minutes and let the product dry completely (5-7 days at 20°C) before loading the truck as usual.

Indicative setting of the spray gun for coarse textured finishing:
– Distance from the surface: about 40 cm.
– Jet adjusting handwheel: ⅛ turn
– Product adjusting handwheel:2 ½ turns
– 1 full coat and ½

TIMES
POT-LIFE 20°C: 120 min (sample mass: 120g)
Subsequent coats can be applied observing a 20/40 minutes flash off period between them. Reduced flash off time, excessive film build and/or low temperature will retard the drying times.

OVERPAINTING
The product can be painted over wet-on-wet with solvent based basecoats.

Download Technical Sheet

DETAILS

Feature: Textured Finishing, Tintable
Yield: 1 – 1,5m²/kg RTU
Filling: 6/6
Colours: Black, Neutral
Size: 720 g / 180g (Catalyst)
Qty Of Units Items Sold By:
– Neutral: 4 Per CTN
– Black: 1
– Catalyst: 4 Per CTN

Oz-Gel distributes Australia-wide. To find your nearest distributor of Oz-Gel products, get in contact with our team today!

SUPERIOR CUSTOMER SERVICE

We are committed to delivering exceptional customer service. Our team is always available to offer assistance, and our flexibility ensures that we can readily adapt to our customers’ requirements.

20+ YEARS IN BUSINESS

Established in 2001, Oz-Gel has proudly served its customers for over two decades and we have the know-how to show for it!

KNOWLEDGEABLE TEAM

At Oz-Gel, we know our stuff. With over 70 years of combined industry knowledge, you can count on our team for expert advice and in-depth knowledge on our wide product range.

FAMILY OWNED

Since its inception in 2001, Oz-Gel has always been family owned and run right here in Australia.